Schönes Holz

Home / Schönes Holz

PELLET SCHÖNES HOLZ

ENplus® A1 SUPER PREMIUM

PELLET SCHÖNES HOLZ is a renewable fuel produced in our European and non-European factories. It is densified into a cylindrical shape, obtained from the grinding and compression of virgin wood derived from sawmill waste.
It is classified as biomass because its combustion produces very low CO2 emissions, even 10 times lower than those of fossil and gaseous fuels (gas and oil).
It is environmentally friendly because it comes from renewable sources that are managed responsibly.
It does not use bark, which contains impurities and mainly sand that vitrifies during combustion, damaging the boilers.
It stands out for its high calorific value and low ash residue, placing it at the top of the market.
Suitable for use in any type of stove, thermo-stove, fireplace, and boiler.

PRODUCT DESCRIPTION

Nominal Diameter6 mm±1
Length3,15 < L < 40 mm
Wood TypeSpruce or Spruce and Conifer
OriginEU and non-EU
Packaging10 kg bag - 15 kg bag
EAN Code8058368693053 - 8058368693022

TECHNICAL CHARACTERISTICS

Parameters DINplus or ENplus A1Certified Average Value for Our PelletReference Value (UNI EN ISO 17225-2:2021, ENplus® ST 1001:2022, ENplus® ST 1003:2022)
Moisture Content5,0 ÷ 9,0 %≤ 10,0 %
Ash Content After Combustion0,40 %≤ 0,70 %
Lower Calorific Value4,9 kWh/kg≥ 4,6 kWh/kg
Density650 ÷ 690 kg/m³≥ 600kg/m³
Ash Melting Temperature> 1200° C≥ 1200° C
Durability98 - 99 %≥ 98,0 %
Fine Dust< 0,25 %≤ 0,5 %

CALORIFIC VALUE

The calorific value is the amount of heat produced during the combustion of a unit of fuel, measured in kWh/kg (Kilowatt-hours per kg), MJ/kg (Megajoules per kg), and Kcal/kg (Kilocalories per kg). A higher calorific value indicates a higher fuel efficiency.
This value primarily depends on the type of wood and varies according to its moisture content. It’s important to note that the Moisture Content should not exceed 10.0%, as higher moisture levels reduce the calorific value. Conversely, the moisture content should not fall below 3.0%, as this can cause the pellets to crumble.
The ENplus® A1 certification mandates a maximum moisture content of = 10.0% and a calorific value of = 4.6 kWh/kg.

The table alongside shows the optimal values and the trend of the calorific value in relation to the moisture content of the pellet in question.